 |
|
Description |
Our Low Price |
|
Order |
 |
|
APlus Clamping Lo-Rise SILVER |
$32.00 |
|
|
| The A Plus no-rise clamp feed is the PERFECT feed tube. It's 1 1/2" tall and your hopper sits less than 3/4" above your marker. It also comes with a lifetime manufacturer warrantee against defect. Fits Bushmaster, Defiant & BKO. Holds Halo, Revolution and Evolution hoppers secure, no sanding or taping required. Available in black and silver polished finish. NOTE: Clamp tubes don't necessarily mean you don't have to sand your hopper neck. In most cases you won't have to but not always. CLICK FOR A LARGER PICTURE] |
|
 |
|
APlus Lever Clamping Lo-Rise BLACK [Out of Stock] |
$32.00 |
|
|
| This is the new Aplus lever clamping low rise for ICD markers (on-gun picture shows cyborg version). There's a small thumb screw that you adjust as tight as you can get it and then you use the leverl to clamp down the rest of the way. NOTE: Clamp tubes don't necessarily mean you don't have to sand your hopper neck. In most cases you won't have to but not always. [CLICK FOR A LARGER PICTURE] |
|
 |
|
CheckIT High Riser SILVER |
$25.00 |
|
|
| High Risers increases the length of your ball stack so more balls are lined up and waiting to drop into the breech. This helps reduce the risk of chopping and missed shots while rapid firing. Available in black and silver polished. Fits BM2K/BKO/DEFIANT [CLICK FOR A LARGER PICTURE] |
|
 |
|
Macdev High Riser SILVER |
$25.00 |
|
|
| WHAT MAKES IT UNIQUE: The open is 1.03" with O rings inside. The O rings grip onto your hopper providing a secure custom fit. The O rings can be removed to fit a Halo. Available in Black & Silver polished. NOTE: We stock these in a VERY low quantity. Fits BM/BKO/DEF [CLICK FOR A LARGER PICTURE] |
|
 |
|
NWPaintball High Rise CHROME |
$32.00 |
|
|
| WHAT MAKES IT UNIQUE: The inside opening is 1.04" and has 2 O rings. The O rings hold your hopper so well that you can actually carry your marker by the hopper and it won't fall off. If you remove the O rings, this high riser becomes PERFECT for Halo hoppers. No sanding down the neck is required. Available in black and chrome. Fits BM2K/BKO/DEFIANT/TRIBAL/INTIMIDATOR [CLICK FOR A LARGER PICTURE] |
|
