 |
|
Description |
Our Low Price |
|
Order |
 |
|
Macdev 2004 Gladiator Black [Out of Stock, Manufacturing delays] |
$80.00 |
|
|
| This is Macdev's totally redesigned regulator. It's so redesigned in fact that they could have name it something different. First of all the hose screws into the bottom but off center and the bottom is now where you adjust the pressure. The internals have all been redesigned and have been fully tested to withstand dirt. This could be the most resistant reg to date for dirt since that was one of the focal points for the redesign. There's also a new huge air-chamber at the top of the reg now helping gain ever greater airflow. All in all this could be the best reg available to date for any marker. Fits BM2K & Defiant (assuming asa threaded models if not, an asa adapter is needed) and BKO's with the Zenitram regulator block. |
|
 |
|
Macdev Sonic LPR BLACK |
$65.00 |
|
|
| Brand new 2003 edition Sonic LPR with new super high flowing reg and cosmetics. Improves shot to shot consistency while lowering operating pressure. The Sonic LPR Gauge Tool (optional) allows for precise tuning of your LPR output. The new endcap fits over allen key adjustment to keep dirt out of the reg. Easily rebuildable if anything should go wrong. Fits Bushmaster, Defiant, and 2004 BKOs. If you also want the Sonic LPR Gauge Tool, check out the LPR/Gauge Tool combo and save some money. [CLICK FOR A LARGER PICTURE] |
|
 |
|
Palmer Micro-Rock BLACK |
$45.00 |
|
|
| Tried and true Palmer Pneumatics have been powering Autocockers since the beginning of time. They come with Palmer's own lifetime warrantee and a 48 hour turnaround time on repairs. There's no better LPR for your marker. This is regulator only, an adapter will be required for both the BKO and Bushmaster/Defiant to use it on your marker. [CLICK FOR A LARGER PICTURE] |
|
 |
|
Zenitram BKO ASA Barb Kit |
$6.50 |
|
|
| This is the barb kit for the Zenitram BKO ASA block. It comes with a new barb for the back of the regulator block, the front of the regulator block for the LPR and a 90 degree high flow one for the LPR. The barbs on the BKO have loctite on them and with their small size, it's difficult to remove them. It's easier to just buy this set of new barbs which are higher flowing as well. Don't forget a MicroRock LPR if you need one! [CLICK FOR A LARGER PICTURE] |
|
